1. Determine the content of the Card, keeping in mind bleed for any image you want to go all the way to the trim and and type or important elements that might be in the safe margin area that might be cutoff due to cutting mechanics. see the diagram below for reference.
Images/Pictures: 300 Pixels/inch or higher.
Type/Vector Objects: 900 Pixels/inch or higher.
Bleed: Any Background, Color or image that extends to the trim edge should extend beyond the trim by 1/8th of an inch. (This will prevent any white lines appearing if cutting is slightly off.
Safe Area: Any pictures or type should be kept away from the trim area by 1/8th of an inch, to keep from getting cut off.
2. Save or export your project out as a PDF using "PDFX1A" settings. Make sure all marks are off and bleed is set to .125 of an inch on all sides.
All PDF's should be 3.75x2.25 before uploading.
3. Select a project type to upload your PDF.
Two Sided
Starting @ $54.73
One Sided
Starting @ $46.73
Any project uploaded here will be printed on a Digital Printing device and is not intended to be exact in terms of spot color reproduction.